Reminder Sensor for the Home Heartbeat

Add comments

The following table identifies the values that are valid for each field of the state record. For a complete description of these values and their use, please see the State Table of The Eaton Home Heartbeat document.

Field Name Data

1 State Record ID A value from 2 (0x02) to 33 (0x21) is assigned to this device

2 ZigBee Binding ID A value from 0 (0x00) to 31 (0x1F) is assigned to this device

3 Device Capabilities Bit 2 (0x04) – Is a sensor
Bit 4 (0x10) – Can receive parameters
Bit 5 (0x20) – Is a sensor

4 Device Type 6 (0x0006) – Reminder

5 Device State Bit 0 (0x01) – Started
Bit 1 (0x02) – Time’s Up!

6 Device State Timer Values from 0 (0x00) to 59 (0x3B) represent 0 to 59 seconds
Values from 64 (0x40) to 123 (0x7B) represent 0 to 59 minutes
Values from 128 (0x80) to 151 (0x97) represent 0 to 23 hours
Values from 160 (0xA0) to 255 (0xFF) represent 0 to 95 days

7 Device Alerts Bit 0 (0x01) – Alarm triggered; controlled by Field 9: Device Configuration
Bit 1 (0x02) – Device off-line, out of range, or battery dead
Bit 2 (0x04) – Low Battery signal sent during “I’m Alive” message from device

Device Name Index

0
1
2
3
4
5
6
7
8
9
10
11
12
13

Reminder Sensor
Call Parents
Change Air Filter
Change Batteries
Change Water Filter
Clean Cutters
Cut Grass
Empty Dehumidifier
Feed Pet
Fertilize Lawn
Get Mail
Get Oil Changed
Our Anniversary
Pay Bills

14
15
16
17
18
19
20
21
22
23
24
25
26

Schedule Checkup
Take Medicine
Take Out Garbage
Take Out Recycle
Take Vitamins
Timer
Visit Dad
Visit Kids
Visit Mom
Walk Dog
Water Garden
Water Grass
Water Plants

9 Device Configuration Bit 0 (0x0001) – Alarm on Started
Bit 1 (0x0002) – Alarm on Time’s Up!
Bit 8 (0x0100) – Call me on Started
Bit 9 (0x0200) – Call me on Time’s Up!

10 Alive Update Timer Values from 0 (0x00) to 59 (0x3B) represent 0 to 59 seconds
Values from 64 (0x40) to 123 (0x7B) represent 0 to 59 minutes
Values from 128 (0x80) to 151 (0x97) represent 0 to 23 hours
Values from 160 (0xA0) to 255 (0xFF) represent 0 to 95 days

11 Update Flags 0x0000 – No update required
0x0080 – Update required

12 Undefined 0x00

13 Device Parameter 0 (0x00) – 15 Seconds (demo)
1 (0x01) – 1 Hour Timer
2 (0x02) – 2 Hour Timer
3 (0x03) – 3 Hour Timer
4 (0x04) – 4 Hour Timer
5 (0x05) – 5 Hour Timer
6 (0x06) – 6 Hour Timer
7 (0x07) – 7 Hour Timer
8 (0x08) – 8 Hour Timer
9 (0x09) – 9 Hour Timer
10 (0x0A) – 10 Hour Timer
11 (0x0B) – 11 Hour Timer
12 (0x0C) – 12 Hour Timer
13 (0x0D) – 1 Day Timer
14 (0x0E) – 2 Day Timer
15 (0x0F) – 3 Day Timer
16 (0x10) – 4 Day Timer
17 (0x11) – 5 Day Timer
18 (0x12) – 6 Day Timer
19 (0x13) – 1 Week Timer
20 (0x14) – 2 Week Timer
21 (0x15) – 3 Week Timer
22 (0x16) – 1 Month Timer
23 (0x17) – 2 Month Timer
24 (0x18) – 3 Month Timer
25 (0x19) – 4 Month Timer
26 (0x1A) – 5 Month Timer
27 (0x1B) – 6 Month Timer
28 (0x1C) – 7 Month Timer
29 (0x1D) – 8 Month Timer
30 (0x1E) – 9 Month Timer
31 (0x1F) – 10 Month Timer
32 (0x20) – 11 Month Timer
33 (0x21) – 12 Month Timer

14 Undefined 0x00000000

15 Pending Update Timer Values from 0 (0x00) to 59 (0x3B) represent 0 to 59 seconds
Values from 64 (0x40) to 123 (0x7B) represent 0 to 59 minutes
Values from 128 (0x80) to 151 (0x97) represent 0 to 23 hours
Values from 160 (0xA0) to 255 (0xFF) represent 0 to 95 days

16 MAC Address 0x000D6F**********

17 Device Name Text name chosen from index list in field 8 above.
An upper or lower case letter may be appended to this name.

Leave a Reply Cancel reply